Large Printer

The Large Printer is one of the Tier-3 Modules in Astroneer. It is used to fabricate large and extra large Modules and Vehicles.

Source

Output	Input	Module
Large Printer	Compound x3	Medium Printer

Uses

The Large Printer has the following uses:

Output	Input
Shelter	Silicone x2 Plastic x2
Auto Extractor	Tungsten Carbide Rubber Steel EXO Chip
Extra Large Shredder	Steel Tungsten Carbide EXO Chip x2
Solar Array	Graphene Aluminum Alloy Glass Copper
XL Wind Turbine	Graphene Aluminum Alloy Ceramic Iron
Medium Sensor Arch	Zinc Quartz
XL Sensor Arch	Zinc x2 Quartz x2
XL Sensor Canopy	Zinc x2 Quartz x2
Large Sensor Ring	Zinc Quartz
Large Sensor Hoop A	Zinc Quartz x2
Large Sensor Hoop B	Zinc x2 Quartz
XL Sensor Hoop A	Zinc x2 Quartz x2
XL Sensor Hoop B	Zinc x3 Quartz
Extra Large Platform A	Ceramic x2 Iron x2
Extra Large Platform B	Iron x4
Extra Large Platform C	Resin x2 Iron x2
Extra Large Curved Platform	Ceramic x2 Compound x2
XL Extended Platform	Resin x3
Figurine Platform	Iron x4
Extra Large Storage	Ceramic x2 Iron x2
Large Rover	Rubber Aluminum Alloy EXO Chip x2
Landing Pad	Ceramic x2 Aluminum
Small Shuttle	Aluminum x2
Medium Shuttle	Ceramic x2 Aluminum Alloy
Large Shuttle	Ceramic Titanium Alloy EXO Chip x2

• Power Consumption Rate: 5 U/s

Trivia

• Before Patch 1.0, the Large Printer was the Vehicle Bay. Large vehicles and attachments for them were fabricated at the Vehicle Bay, and it also acted as a landing spot for all shuttles, before the introduction of the Landing Pad.
• Extra Large items take a long time to print. The time remaining can be based on the number of bits of resource nuggets remaining on the printer.

Media

• 

  The Vehicle Bay, before being replaced with the Large Printer
• 

  Large Printer Icon