Guide:Nanocarbon Alloy Automation

The following guide will help you set up a Nanocarbon Alloy automation line. The image below will help to illustrate the locations of each part of the crafting line.

Items you will need:

• 10x Large Platform A
• 24x Medium Platform A
• 16x Auto Arm
• 5x Chemistry Lab
• 3x Smelting Furnace
• 2x Atmospheric Condenser
• 8x Storage (Medium Resource Canister, Medium Storage, Medium Storage Silo)

Resources needed:

• 50x Resin
• 16x Graphite
• 16x Aluminum
• 5x Ceramic
• 5x Tungsten
• 7x Glass
• 3x Compound
• 2x Plastic
• 2x Iron

You will also need either 16x Resin for Medium Storage, 8x Plastic and 8x Glass for Medium Resource Canister, or 16x Titanium for Medium Storage Silo, depending on which storage option you choose.

Notice: If you use Medium Resource Canisters you will need to replace two of the them with Medium Gas Canisters.

Power consumption rate

Maximum: 121 U/s

• Atmospheric Condensers - 40 U/s
• Chemistry Labs - 50 U/s
• Smelting Furnaces - 15 U/s
• Auto Arms - 16 U/s

You may reach the maximum occasionally, but typically the setup will run around ~20 U/s.